Clean the area thoroughly with rubbing alcohol or soap and water. Do not use a glass cleaner because it will leave a residue behind that will prevent the label from adhering well.
Rub a squeegee or credit card firmly across the through the clear transfer tape to prepare it for application. This ensures the label will stick to the transfer tape and removes any air bubbles that may have formed.
Peel the white paper backing off the sticker. If the label sticks to the backing, repeat Step 2.
Slowly lower the label onto the surface and rub it in place firmly with a squeegee or credit card. For best results, wait 24 hours before moving to the next step.
Slowly peel the clear transfer tape off at an angle. Be careful not to pull the sticker off the surface. If sticker pulls away from the surface repeat Step 4.